Solenoidal Fields and Irrotational Fields

An Overview of the Classification of Vector Fields

According to whether the divergence and the curl vanish, vector fields fall into four classes:

TypeDivergenceCurlOther nameTypical example
Harmonic field∇⋅F⃗=0\nabla \cdot \vec{F} = 0∇×F⃗=0\nabla \times \vec{F} = 0solenoidal and irrotationalthe electrostatic field (in a charge-free region), an irrotational incompressible velocity field
Irrotational fieldarbitrary∇×F⃗=0\nabla \times \vec{F} = 0a field with a potential / a conservative fielda gravitational field, an electrostatic field
Solenoidal field∇⋅F⃗=0\nabla \cdot \vec{F} = 0arbitrarya tube field / a tube-shaped fielda magnetic field, the velocity field of an incompressible fluid
A general fieldarbitraryarbitrary—a general velocity field, a force field

Solenoidal Fields (Tube Fields)

Solenoidal field

If the divergence of the vector field F⃗\vec{F} vanishes everywhere, that is,

∇⋅F⃗=0\nabla \cdot \vec{F} = 0

then F⃗\vec{F} is called a solenoidal field (also called a tube field, a tube-shaped field or a divergence-free field).

The Properties of a Solenoidal Field

Theorem1
  1. The flux through any closed surface is zero: if F⃗\vec{F} is a solenoidal field, then the flux through the outward side of any closed surface in the region is zero: ∯ΣF⃗⋅dS⃗=0\oiint_\Sigma \vec{F} \cdot d\vec{S} = 0

  2. The flux is independent of the shape of the surface: a solenoidal field has equal flux through any two surfaces with the same boundary curve (it depends only on the boundary curve, not on the shape of the surface).

  3. The existence of a vector potential: under suitable conditions (such as the region being simply connected in two dimensions), a solenoidal field F⃗\vec{F} can be written as the curl of some vector field A⃗\vec{A}: F⃗=∇×A⃗\vec{F} = \nabla \times \vec{A} where A⃗\vec{A} is called the vector potential of F⃗\vec{F}.

Common Solenoidal Fields

  • the magnetic field: ∇⋅B⃗=0\nabla \cdot \vec{B} = 0 (one of the Maxwell equations; magnetic monopoles do not exist)
  • the velocity field of an incompressible fluid: ∇⋅v⃗=0\nabla \cdot \vec{v} = 0 (the density does not change; what flows in equals what flows out)
  • curl fields: the curl of any vector field is a solenoidal field, ∇⋅(∇×F⃗)=0\nabla \cdot (\nabla \times \vec{F}) = 0

Irrotational Fields

Irrotational field

If the curl of the vector field F⃗\vec{F} vanishes everywhere, that is,

∇×F⃗=0⃗\nabla \times \vec{F} = \vec{0}

then F⃗\vec{F} is called an irrotational field.

The Properties of an Irrotational Field

In a simply connected region, an irrotational field is equivalent to a field with a potential (a conservative field):

  1. A potential function exists: F⃗=∇u\vec{F} = \nabla u
  2. The line integral is independent of the path: ∫LF⃗⋅dr⃗\int_L \vec{F} \cdot d\vec{r} depends only on the endpoints
  3. The circulation around any closed curve is zero: ∮LF⃗⋅dr⃗=0\oint_L \vec{F} \cdot d\vec{r} = 0

Common Irrotational Fields

  • the gravitational field: ∇×F⃗=0\nabla \times \vec{F} = 0 (gravity is a conservative force)
  • the electrostatic field: ∇×E⃗=0\nabla \times \vec{E} = 0 (the electrostatic field is conservative)
  • gradient fields: the gradient of any scalar field is irrotational, ∇×(∇u)=0\nabla \times (\nabla u) = 0

Harmonic Fields

Harmonic field

If the vector field F⃗\vec{F} is both solenoidal and irrotational, that is,

∇⋅F⃗=0and∇×F⃗=0⃗\nabla \cdot \vec{F} = 0 \quad \text{and} \quad \nabla \times \vec{F} = \vec{0}

then F⃗\vec{F} is called a harmonic field (a solenoidal and irrotational field).

The Properties of a Harmonic Field

Theorem2

A harmonic field F⃗\vec{F} is both a field with a potential and a solenoidal field, and therefore:

  1. There exists a potential function uu with F⃗=∇u\vec{F} = \nabla u

  2. Substituting into the solenoidal condition ∇⋅F⃗=0\nabla \cdot \vec{F} = 0 gives: ∇⋅(∇u)=∇2u=0\nabla \cdot (\nabla u) = \nabla^2 u = 0 that is, the potential function uu satisfies the Laplace equation, and such a function is called a harmonic function.

  3. The potential function of a harmonic field is a harmonic function, and harmonic functions have many excellent properties (the mean value property, the maximum principle, analyticity, and so on).

Common Harmonic Fields

  • the electrostatic field in a charge-free region: in a region without charge, ∇⋅E⃗=0\nabla \cdot \vec{E} = 0 and ∇×E⃗=0\nabla \times \vec{E} = 0, so it is a harmonic field. The potential ϕ\phi satisfies the Laplace equation ∇2ϕ=0\nabla^2 \phi = 0.
  • an irrotational incompressible velocity field: a velocity field that is both irrotational and incompressible is a harmonic field.
  • the gravitational field (in a mass-free region): in a region without mass, the gravitational field is a harmonic field.

The Helmholtz Decomposition of a Vector Field

Theorem3

The Helmholtz decomposition theorem: under suitable conditions, any vector field F⃗\vec{F} can be uniquely decomposed as the sum of an irrotational field and a solenoidal field:

F⃗=∇u+∇×A⃗\vec{F} = \nabla u + \nabla \times \vec{A}

where:

  • ∇u\nabla u is the irrotational part (a field with a potential / a longitudinal field), produced by the sources of the divergence
  • ∇×A⃗\nabla \times \vec{A} is the solenoidal part (a tube field / a transverse field), produced by the sources of the curl

This decomposition has important applications in electromagnetic theory and in fluid mechanics.

Worked Examples

Example 1: Deciding Whether a Field Is Solenoidal

Verify that the vector field F⃗=(y,z,x)\vec{F} = (y, z, x) is not a solenoidal field, and that the vector field G⃗=(y−z,z−x,x−y)\vec{G} = (y-z, z-x, x-y) is one.

a solenoidal fieldthe divergencea tube field

Approach:

Compute the divergence and decide whether it is zero.

Steps:

  1. F⃗=(y,z,x)\vec{F} = (y, z, x): ∇⋅F⃗=∂∂x(y)+∂∂y(z)+∂∂z(x)=0+0+0=0\nabla \cdot \vec{F} = \frac{\partial}{\partial x}(y) + \frac{\partial}{\partial y}(z) + \frac{\partial}{\partial z}(x) = 0+0+0 = 0 So F⃗\vec{F} is also a solenoidal field.
  2. G⃗=(y−z,z−x,x−y)\vec{G} = (y-z, z-x, x-y): ∇⋅G⃗=∂∂x(y−z)+∂∂y(z−x)+∂∂z(x−y)=0+0+0=0\nabla \cdot \vec{G} = \frac{\partial}{\partial x}(y-z) + \frac{\partial}{\partial y}(z-x) + \frac{\partial}{\partial z}(x-y) = 0+0+0 = 0 So G⃗\vec{G} is also a solenoidal field.

(Note: both of them are solenoidal fields, so the premise of the problem is mistaken, but the method of computation is correct.)

Answer: the divergence of both vector fields is zero, so both are solenoidal fields.

Example 2: Deciding Whether a Field Is Harmonic

Let F⃗=(xr3,yr3,zr3)\vec{F} = (\frac{x}{r^3}, \frac{y}{r^3}, \frac{z}{r^3}), where r=x2+y2+z2r = \sqrt{x^2+y^2+z^2}. Verify that F⃗\vec{F} is a harmonic field on the region r≠0r \neq 0.

a harmonic fieldsolenoidal and irrotationala point source fieldan electric field

Approach:

Compute the divergence and the curl separately, and verify that both vanish.

Steps:

  1. F⃗=r⃗r3\vec{F} = \frac{\vec{r}}{r^3}, which is the form of the electric field of a point charge (or the gravitational field of a point mass).
  2. The divergence: ∂∂x(xr3)=1r3−3x2r5\frac{\partial}{\partial x}(\frac{x}{r^3}) = \frac{1}{r^3} - \frac{3x^2}{r^5} Similarly ∂∂y(yr3)=1r3−3y2r5\frac{\partial}{\partial y}(\frac{y}{r^3}) = \frac{1}{r^3} - \frac{3y^2}{r^5} and ∂∂z(zr3)=1r3−3z2r5\frac{\partial}{\partial z}(\frac{z}{r^3}) = \frac{1}{r^3} - \frac{3z^2}{r^5} ∇⋅F⃗=3r3−3(x2+y2+z2)r5=3r3−3r2r5=0\nabla \cdot \vec{F} = \frac{3}{r^3} - \frac{3(x^2+y^2+z^2)}{r^5} = \frac{3}{r^3} - \frac{3r^2}{r^5} = 0 (r≠0r \neq 0)
  3. The curl: F⃗=∇(−1r)\vec{F} = \nabla(-\frac{1}{r}) (because ∂∂x(−1r)=xr3\frac{\partial}{\partial x}(-\frac{1}{r}) = \frac{x}{r^3}), so F⃗\vec{F} is a gradient field. By the identity ∇×(∇u)=0\nabla \times (\nabla u) = 0, we get ∇×F⃗=0\nabla \times \vec{F} = 0.
  4. The divergence vanishes and the curl vanishes, so F⃗\vec{F} is a harmonic field on the region r≠0r \neq 0.

Answer: on the region r≠0r \neq 0, F⃗\vec{F} is a harmonic field. (Note that the origin is a singular point, where the divergence is infinite, corresponding to a point source.)

Example 3: Finding a Vector Potential

Find a vector potential A⃗\vec{A} of the vector field F⃗=(y,−x,0)\vec{F} = (y, -x, 0) (that is, find A⃗\vec{A} such that ∇×A⃗=F⃗\nabla \times \vec{A} = \vec{F}).

a solenoidal fieldthe vector potentialthe curl

Approach:

First verify that the field is solenoidal, and then put A⃗=(0,0,Az)\vec{A} = (0, 0, A_z) (a simplifying assumption) and solve for AzA_z.

Steps:

  1. Verifying that it is solenoidal: ∇⋅F⃗=∂∂x(y)+∂∂y(−x)+0=0\nabla \cdot \vec{F} = \frac{\partial}{\partial x}(y) + \frac{\partial}{\partial y}(-x) + 0 = 0, so it is a solenoidal field.
  2. Put A⃗=(0,0,Az(x,y))\vec{A} = (0, 0, A_z(x,y)), so that: ∇×A⃗=(∂Az∂y,−∂Az∂x,0)\nabla \times \vec{A} = (\frac{\partial A_z}{\partial y}, -\frac{\partial A_z}{\partial x}, 0)
  3. Setting ∇×A⃗=F⃗=(y,−x,0)\nabla \times \vec{A} = \vec{F} = (y, -x, 0) gives: ∂Az∂y=y⇒Az=y22+ϕ(x)\frac{\partial A_z}{\partial y} = y \Rightarrow A_z = \frac{y^2}{2} + \phi(x) −∂Az∂x=−x⇒∂Az∂x=x⇒Az=x22+ψ(y)-\frac{\partial A_z}{\partial x} = -x \Rightarrow \frac{\partial A_z}{\partial x} = x \Rightarrow A_z = \frac{x^2}{2} + \psi(y)
  4. Taking Az=x2+y22A_z = \frac{x^2+y^2}{2} gives A⃗=(0,0,x2+y22)\vec{A} = (0, 0, \frac{x^2+y^2}{2})
  5. Checking: ∇×A⃗=(∂∂y(x2+y22),−∂∂x(x2+y22),0)=(y,−x,0)=F⃗\nabla \times \vec{A} = (\frac{\partial}{\partial y}(\frac{x^2+y^2}{2}), -\frac{\partial}{\partial x}(\frac{x^2+y^2}{2}), 0) = (y, -x, 0) = \vec{F} ✓

Answer: one vector potential is A⃗=(0,0,x2+y22)\vec{A} = (0, 0, \frac{x^2+y^2}{2}). (The vector potential is not unique: any gradient field may be added to it.)


Exercises

Exercise 1

Decide whether the vector field F⃗=(x2−y2,2xy,0)\vec{F} = (x^2-y^2, 2xy, 0) is irrotational or solenoidal.

an irrotational fielda solenoidal fieldthe divergencethe curl

Approach:

Compute the divergence and the curl separately.

Steps:

  1. The divergence: ∇⋅F⃗=∂∂x(x2−y2)+∂∂y(2xy)=2x+2x=4x≠0\nabla \cdot \vec{F} = \frac{\partial}{\partial x}(x^2-y^2) + \frac{\partial}{\partial y}(2xy) = 2x + 2x = 4x \neq 0, so it is not a solenoidal field.
  2. The curl (the zz-component): ∂Q∂x−∂P∂y=2y−(−2y)=4y≠0\frac{\partial Q}{\partial x} - \frac{\partial P}{\partial y} = 2y - (-2y) = 4y \neq 0, so it is not an irrotational field.
  3. This is a general vector field: neither solenoidal nor irrotational.

Answer: it is neither a solenoidal field nor an irrotational field, but a general field.

Exercise 2

Verify that the vector field F⃗=(2x,2y,2z)\vec{F} = (2x, 2y, 2z) is irrotational, and find its potential function.

an irrotational fielda field with a potentialthe potential functiona gradient field

Approach:

Verify that the curl is zero, and then find the potential function by matching the differentials.

Steps:

  1. The curl: the xx-component is ∂R∂y−∂Q∂z=0−0=0\frac{\partial R}{\partial y} - \frac{\partial Q}{\partial z} = 0 - 0 = 0, the yy-component is ∂P∂z−∂R∂x=0−0=0\frac{\partial P}{\partial z} - \frac{\partial R}{\partial x} = 0 - 0 = 0, and the zz-component is ∂Q∂x−∂P∂y=0−0=0\frac{\partial Q}{\partial x} - \frac{\partial P}{\partial y} = 0 - 0 = 0
  2. Hence ∇×F⃗=0⃗\nabla \times \vec{F} = \vec{0}, so it is irrotational.
  3. Looking for uu with ∂u∂x=2x\frac{\partial u}{\partial x} = 2x, ∂u∂y=2y\frac{\partial u}{\partial y} = 2y and ∂u∂z=2z\frac{\partial u}{\partial z} = 2z: u=x2+y2+z2+Cu = x^2 + y^2 + z^2 + C

Answer: F⃗\vec{F} is irrotational, and its potential function is u=x2+y2+z2+Cu = x^2+y^2+z^2+C (so F⃗=∇(x2+y2+z2)\vec{F} = \nabla(x^2+y^2+z^2)).


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
∇⋅F⃗\nabla \cdot \vec{F}DivergencedivergenceThe divergence of the vector field
∇×F⃗\nabla \times \vec{F}CurlcurlThe curl of the vector field
A⃗\vec{A}Vector potentialvector potentialA vector field whose curl is F⃗\vec{F}
uuPotential functionpotential functionA scalar function with F⃗=∇u\vec{F} = \nabla u
∇2u\nabla^2 uLaplacianLaplacianThe Laplace operator applied to uu
Σ\SigmaClosed surfaceclosed surfaceA closed surface in the region

Key Terms

English termPronunciationNote
source-free field/sɔːrs friː fiːld/a vector field with zero divergence
solenoidal field/səˈlɛnɔɪdəl fiːld/that is, a solenoidal field
tubular field/ˈtjuːbjələr fiːld/that is, a solenoidal field
divergence-free field/daɪˈvɜːrdʒəns friː fiːld/that is, a solenoidal field
irrotational field/ˌɪrəʊˈteɪʃənəl fiːld/a vector field with zero curl
harmonic field/hɑːrˈmɒnɪk fiːld/a vector field that is both solenoidal and irrotational
harmonic function/hɑːrˈmɒnɪk ˈfʌŋkʃən/a function satisfying the Laplace equation
Laplace equation/ləˈplɑːs ɪˈkweɪʒən/∇2u=0\nabla^2 u = 0
vector potential/ˈvɛktər pəˈtɛnʃəl/a vector field whose curl equals a given vector field
vector potential/ˈvɛktər pəˈtɛnʃəl/that is, the vector potential
Helmholtz decomposition/ˈhɛlmhoʊlts ˌdiːkɒmpəˈzɪʃən/the decomposition of a vector field into an irrotational part and a solenoidal part
longitudinal field/ˌlɒndʒɪˈtjuːdɪnl fiːld/the irrotational part, a gradient field
transverse field/trænsˈvɜːrs fiːld/the solenoidal part, a curl field

Found an issue with this content?

Tell us what could be improved.