The Surface Integral of the Second Kind (with Respect to Coordinates)

The Physical Background: Flux

The physical background of the surface integral of the second kind is the flux. Suppose F⃗(x,y,z)=Pi⃗+Qj⃗+Rk⃗\vec{F}(x,y,z) = P\vec{i} + Q\vec{j} + R\vec{k} is a vector field (a velocity field, an electric field, a magnetic field), and Σ\Sigma is an oriented surface. The flux of the vector field through the surface Σ\Sigma (the amount flowing through the surface per unit time) is the surface integral of the second kind:

Φ=∬ΣP dy dz+Q dz dx+R dx dy=∬ΣF⃗⋅dS⃗\Phi = \iint_\Sigma P \, dy\,dz + Q \, dz\,dx + R \, dx\,dy = \iint_\Sigma \vec{F} \cdot d\vec{S}

Oriented Surfaces

The surface integral of the second kind depends on the “side” (orientation) of the surface, so the notion of an oriented surface has to be introduced first.

Oriented surface

A surface on which the direction of the normal vector has been chosen is called an oriented surface. For a surface z=z(x,y)z = z(x,y) one usually stipulates:

  • the upper side: the normal vector points in the positive zz-direction (cos⁡γ>0\cos\gamma > 0)
  • the lower side: the normal vector points in the negative zz-direction (cos⁡γ<0\cos\gamma < 0)

For a closed surface one usually stipulates:

  • the outer side: the normal vector points outside the surface
  • the inner side: the normal vector points inside the surface

The Definition of the Surface Integral of the Second Kind

Surface integral of the second kind

Let Σ\Sigma be an oriented smooth or piecewise smooth surface, and let the functions P(x,y,z),Q(x,y,z),R(x,y,z)P(x,y,z), Q(x,y,z), R(x,y,z) be bounded on Σ\Sigma. Divide Σ\Sigma arbitrarily into nn small pieces ΔSi\Delta S_i, whose projections on the yOzyOz, zOxzOx and xOyxOy planes are (ΔSi)yz(\Delta S_i)_{yz}, (ΔSi)zx(\Delta S_i)_{zx} and (ΔSi)xy(\Delta S_i)_{xy} respectively (directed projections, which may be positive or negative). In each small piece choose an arbitrary point (ξi,ηi,ζi)(\xi_i,\eta_i,\zeta_i), and sum:

∑i=1n[P(ξi,ηi,ζi)(ΔSi)yz+Q(ξi,ηi,ζi)(ΔSi)zx+R(ξi,ηi,ζi)(ΔSi)xy]\sum_{i=1}^n \left[ P(\xi_i,\eta_i,\zeta_i)(\Delta S_i)_{yz} + Q(\xi_i,\eta_i,\zeta_i)(\Delta S_i)_{zx} + R(\xi_i,\eta_i,\zeta_i)(\Delta S_i)_{xy} \right]

If, as the maximum λ\lambda of the diameters of the small pieces tends to 0, this sum has a limit, then this limit is called the surface integral of the second kind of the vector function (P,Q,R)(P,Q,R) over the oriented surface Σ\Sigma (the surface integral with respect to coordinates), written:

∬ΣP(x,y,z) dy dz+Q(x,y,z) dz dx+R(x,y,z) dx dy\iint_\Sigma P(x,y,z) \, dy\,dz + Q(x,y,z) \, dz\,dx + R(x,y,z) \, dx\,dy

or, in short form, ∬ΣF⃗⋅dS⃗\iint_\Sigma \vec{F} \cdot d\vec{S}, where dS⃗=(dy dz,dz dx,dx dy)d\vec{S} = (dy\,dz, dz\,dx, dx\,dy).

The Properties of the Surface Integral of the Second Kind

  1. Linearity: ∬Σ(aF⃗1+bF⃗2)⋅dS⃗=a∬ΣF⃗1⋅dS⃗+b∬ΣF⃗2⋅dS⃗\iint_\Sigma (a\vec{F}_1 + b\vec{F}_2) \cdot d\vec{S} = a\iint_\Sigma \vec{F}_1 \cdot d\vec{S} + b\iint_\Sigma \vec{F}_2 \cdot d\vec{S}
  2. Additivity over surfaces: if Σ=Σ1+Σ2\Sigma = \Sigma_1 + \Sigma_2, then ∬ΣF⃗⋅dS⃗=∬Σ1F⃗⋅dS⃗+∬Σ2F⃗⋅dS⃗\iint_\Sigma \vec{F} \cdot d\vec{S} = \iint_{\Sigma_1} \vec{F} \cdot d\vec{S} + \iint_{\Sigma_2} \vec{F} \cdot d\vec{S}
  3. Dependence on the orientation: ∬Σ−F⃗⋅dS⃗=−∬ΣF⃗⋅dS⃗\iint_{\Sigma^-} \vec{F} \cdot d\vec{S} = -\iint_\Sigma \vec{F} \cdot d\vec{S}, where Σ−\Sigma^- denotes the same surface taken on the opposite side.

Computing the Surface Integral of the Second Kind

The Explicit Surface z=z(x,y)z = z(x,y) (computing R dx dyR \, dx\,dy)

Computation for an explicit surface (the dxdy term)

Suppose the oriented surface Σ\Sigma is given by z=z(x,y)z = z(x,y), taken on the upper side (or the lower side), and DxyD_{xy} is the region of projection of Σ\Sigma onto the xOyxOy plane. Then

∬ΣR(x,y,z) dx dy=±∬DxyR(x,y,z(x,y)) dx dy\iint_\Sigma R(x,y,z) \, dx\,dy = \pm \iint_{D_{xy}} R(x, y, z(x,y)) \, dx\,dy

where the upper side takes the plus sign and the lower side the minus sign.

The Explicit Surface x=x(y,z)x = x(y,z) (computing P dy dzP \, dy\,dz)

∬ΣP(x,y,z) dy dz=±∬DyzP(x(y,z),y,z) dy dz\iint_\Sigma P(x,y,z) \, dy\,dz = \pm \iint_{D_{yz}} P(x(y,z), y, z) \, dy\,dz

where the front side (the positive xx-direction) takes the plus sign and the back side the minus sign.

The Explicit Surface y=y(x,z)y = y(x,z) (computing Q dz dxQ \, dz\,dx)

∬ΣQ(x,y,z) dz dx=±∬DxzQ(x,y(x,z),z) dx dz\iint_\Sigma Q(x,y,z) \, dz\,dx = \pm \iint_{D_{xz}} Q(x, y(x,z), z) \, dx\,dz

where the right side (the positive yy-direction) takes the plus sign and the left side the minus sign.

The Unified Formula (the projection formula)

The unified projection formula

Suppose the oriented surface Σ\Sigma is given by z=z(x,y)z = z(x,y) and taken on the upper side. Then the three components can be projected uniformly onto the xOyxOy plane:

∬ΣP dy dz+Q dz dx+R dx dy=∬Dxy(−P∂z∂x−Q∂z∂y+R)dx dy\iint_\Sigma P \, dy\,dz + Q \, dz\,dx + R \, dx\,dy = \iint_{D_{xy}} \left( -P\frac{\partial z}{\partial x} - Q\frac{\partial z}{\partial y} + R \right) dx\,dy If the lower side is taken, a minus sign is put in front of the whole expression.

The essence of this formula is that it uses the relation between the two kinds of surface integral (see below) to unify the three projections onto a single plane, which avoids projecting them separately.

The Relation between the Two Kinds of Surface Integral

Theorem1

Let Σ\Sigma be an oriented smooth surface, and let cos⁡α,cos⁡β,cos⁡γ\cos\alpha, \cos\beta, \cos\gamma be the direction cosines of the normal vector of Σ\Sigma at the point (x,y,z)(x,y,z) (the direction of the normal vector agreeing with the side of the surface). Then the two kinds of surface integral are related by:

∬ΣP dy dz+Q dz dx+R dx dy=∬Σ(Pcos⁡α+Qcos⁡β+Rcos⁡γ) dS\iint_\Sigma P \, dy\,dz + Q \, dz\,dx + R \, dx\,dy = \iint_\Sigma (P\cos\alpha + Q\cos\beta + R\cos\gamma) \, dS

that is:

∬ΣF⃗⋅dS⃗=∬Σ(F⃗⋅n⃗) dS\iint_\Sigma \vec{F} \cdot d\vec{S} = \iint_\Sigma (\vec{F} \cdot \vec{n}) \, dS

where n⃗=(cos⁡α,cos⁡β,cos⁡γ)\vec{n} = (\cos\alpha, \cos\beta, \cos\gamma) is the unit normal vector.

Worked Examples

Example 1: Computing a Flux

Compute ∬Σx dy dz+y dz dx+z dx dy\iint_\Sigma x \, dy\,dz + y \, dz\,dx + z \, dx\,dy, where Σ\Sigma is the plane x+y+z=1x+y+z=1 in the first octant, taken on the upper side.

the surface integral of the second kinda planefluxthe unified projection formula

Approach:

Use the unified projection formula, projecting the three components uniformly onto the xOyxOy plane.

Steps:

  1. The surface z=1−x−yz = 1-x-y, taken on the upper side, with zx=−1, zy=−1z_x = -1, \, z_y = -1
  2. The region of projection Dxy:x≥0,y≥0,x+y≤1D_{xy}: x \geq 0, y \geq 0, x+y \leq 1
  3. The unified projection formula: ∬Σx dy dz+y dz dx+z dx dy=∬Dxy[−x(−1)−y(−1)+(1−x−y)]dx dy=∬Dxy(x+y+1−x−y)dx dy=∬Dxy1 dx dy=12\iint_\Sigma x \, dy\,dz + y \, dz\,dx + z \, dx\,dy = \iint_{D_{xy}} [-x(-1) - y(-1) + (1-x-y)] dx\,dy = \iint_{D_{xy}} (x + y + 1 - x - y) dx\,dy = \iint_{D_{xy}} 1 \, dx\,dy = \frac{1}{2}

Answer: 12\frac{1}{2}

Example 2: The Flux through a Closed Surface

Compute ∯Σx3 dy dz+y3 dz dx+z3 dx dy\oiint_\Sigma x^3 \, dy\,dz + y^3 \, dz\,dx + z^3 \, dx\,dy, where Σ\Sigma is the outer side of the sphere x2+y2+z2=a2x^2+y^2+z^2 = a^2.

the surface integral of the second kinda spherethe outer sideGauss's theorem

Approach:

For the surface integral of the second kind over a closed surface, use Gauss’s theorem to convert it into a triple integral.

Steps:

  1. By Gauss’s theorem: ∯Σx3dy dz+y3dz dx+z3dx dy=∭Ω(3x2+3y2+3z2)dv=3∭Ω(x2+y2+z2)dv\oiint_\Sigma x^3 dy\,dz + y^3 dz\,dx + z^3 dx\,dy = \iiint_\Omega (3x^2+3y^2+3z^2) dv = 3\iiint_\Omega (x^2+y^2+z^2) dv
  2. Spherical coordinates: =3∫02πdθ∫0πsin⁡ϕ dϕ∫0ar2⋅r2dr=3⋅2π⋅2⋅a55=12πa55= 3\int_0^{2\pi} d\theta \int_0^\pi \sin\phi \, d\phi \int_0^a r^2 \cdot r^2 dr = 3 \cdot 2\pi \cdot 2 \cdot \frac{a^5}{5} = \frac{12\pi a^5}{5}

Answer: 12πa55\frac{12\pi a^5}{5}

Example 3: A Surface Integral over a Cylinder

Compute ∬Σz dx dy\iint_\Sigma z \, dx\,dy, where Σ\Sigma is the outer side of the part of the cylinder x2+y2=a2x^2+y^2 = a^2 between z=0z=0 and z=hz=h.

the surface integral of the second kinda cylindera zero projectionthe outer side

Approach:

The cylinder is perpendicular to the xOyxOy plane, and its projection onto that plane is a curve (of zero area), so the dx dydx\,dy term vanishes.

Steps:

  1. The generators of the cylinder x2+y2=a2x^2+y^2=a^2 are parallel to the zz-axis, and hence perpendicular to the xOyxOy plane
  2. The projection of the cylinder onto the xOyxOy plane is the circle x2+y2=a2x^2+y^2=a^2, whose area is zero
  3. Therefore ∬Σz dx dy=0\iint_\Sigma z \, dx\,dy = 0

Answer: 00

(Note: if you were computing x dy dzx \, dy\,dz or y dz dxy \, dz\,dx, the result would not be zero, and you would have to project onto the yOzyOz or zOxzOx plane respectively.)


Exercises

Exercise 1

Compute ∬Σ(x+y+z) dx dy\iint_\Sigma (x+y+z) \, dx\,dy, where Σ\Sigma is the upper side of the part of the sphere x2+y2+z2=a2x^2+y^2+z^2 = a^2 with z≥0z \geq 0.

the surface integral of the second kindthe upper hemispherethe upper sidepolar coordinates

Approach:

The upper hemisphere z=a2−x2−y2z = \sqrt{a^2-x^2-y^2}, taken on the upper side, projects onto the disk x2+y2≤a2x^2+y^2 \leq a^2.

Steps:

  1. z=a2−x2−y2z = \sqrt{a^2-x^2-y^2}, with the plus sign for the upper side
  2. ∬Σ(x+y+z)dx dy=∬Dxy(x+y+a2−x2−y2)dx dy\iint_\Sigma (x+y+z) dx\,dy = \iint_{D_{xy}} (x+y+\sqrt{a^2-x^2-y^2}) dx\,dy
  3. By symmetry, ∬Dxyx dx dy=0\iint_{D_{xy}} x \, dx\,dy = 0 and ∬Dxyy dx dy=0\iint_{D_{xy}} y \, dx\,dy = 0
  4. =∬Dxya2−x2−y2 dx dy=∫02πdθ∫0aa2−ρ2⋅ρ dρ=2π⋅[−13(a2−ρ2)3/2]0a=2π⋅a33=2πa33= \iint_{D_{xy}} \sqrt{a^2-x^2-y^2} \, dx\,dy = \int_0^{2\pi} d\theta \int_0^a \sqrt{a^2-\rho^2} \cdot \rho \, d\rho = 2\pi \cdot \left[-\frac{1}{3}(a^2-\rho^2)^{3/2}\right]_0^a = 2\pi \cdot \frac{a^3}{3} = \frac{2\pi a^3}{3}

Answer: 2πa33\frac{2\pi a^3}{3}

Exercise 2

Compute ∬ΣF⃗⋅dS⃗\iint_\Sigma \vec{F} \cdot d\vec{S}, where F⃗=(0,0,z)\vec{F} = (0, 0, z) and Σ\Sigma is the lower side of the part of the cone z=x2+y2z = \sqrt{x^2+y^2} between z=0z=0 and z=1z=1.

the surface integral of the second kinda conethe lower sidepolar coordinates

Approach:

The cone is taken on the lower side, so the dx dydx\,dy term takes the minus sign.

Steps:

  1. z=x2+y2z = \sqrt{x^2+y^2}, with the minus sign for the lower side
  2. The region of projection D:x2+y2≤1D: x^2+y^2 \leq 1
  3. ∬Σz dx dy=−∬Dx2+y2 dx dy=−∫02πdθ∫01ρ⋅ρ dρ=−2π⋅13=−2π3\iint_\Sigma z \, dx\,dy = -\iint_D \sqrt{x^2+y^2} \, dx\,dy = -\int_0^{2\pi} d\theta \int_0^1 \rho \cdot \rho \, d\rho = -2\pi \cdot \frac{1}{3} = -\frac{2\pi}{3}

Answer: −2π3-\frac{2\pi}{3}


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
∬ΣPdydz+Qdzdx+Rdxdy\iint_\Sigma P dydz+Q dzdx+R dxdySurface integral of the second kindsurface integral of second kindThe surface integral with respect to coordinates
dS⃗d\vec{S}Directed area elementdirected surface element(dydz,dzdx,dxdy)(dydz, dzdx, dxdy), the directed area element
F⃗\vec{F}Vector fieldvector field(P,Q,R)(P, Q, R), a velocity field or a force field
Σ−\Sigma^-Reverse side surfacereverse side surfaceThe same surface taken on the opposite side
cos⁡α,cos⁡β,cos⁡γ\cos\alpha, \cos\beta, \cos\gammaNormal direction cosinesnormal direction cosinesThe direction cosines of the normal vector of the surface
n⃗\vec{n}Unit normal vectorunit normal vectorThe unit normal vector in the direction of the side of the surface
Φ\PhiFluxfluxThe amount of the vector field passing through the surface

Key Terms

English termPronunciationNote
surface integral of the second kind/ˈsɜːrfɪs ˈɪntɪɡrəl əv ðə ˈsɛkənd kaɪnd/the surface integral with respect to coordinates
integral with respect to coordinates/ˈɪntɪɡrəl wɪð rɪˈspɛkt tuː koʊˈɔːrdɪnəts/that is, the surface integral of the second kind
oriented surface/ˈɔːriɛntɪd ˈsɜːrfɪs/a surface on which the direction of the normal vector has been chosen
side of surface/saɪd əv ˈsɜːrfɪs/the orientation of a surface (upper/lower side, inner/outer side)
outward side/ˈaʊtwərd saɪd/the outward-normal side of a closed surface
flux/flʌks/the amount of a vector field passing through a surface
normal vector/ˈnɔːrməl ˈvɛktər/a vector perpendicular to the surface
one-sided surface/wʌn ˈsaɪdɪd ˈsɜːrfɪs/such as the Möbius strip, whose two sides cannot be distinguished
two-sided surface/tuː ˈsaɪdɪd ˈsɜːrfɪs/a surface whose two sides can be distinguished
unified projection method/ˈjuːnɪfaɪd prəˈdʒɛkʃən ˈmɛθəd/projecting the three components uniformly onto one plane

Found an issue with this content?

Tell us what could be improved.