The Polar and Cylindrical Coordinate Transformations

A Unified Perspective

The polar coordinate transformation and the cylindrical coordinate transformation are essentially the same transformation in different dimensions: both convert the “rectangular coordinates” into a system of “polar radius + polar angle (+ vertical coordinate)”. Polar coordinates are used in two dimensions, and cylindrical coordinates in three dimensions (polar coordinates plus the zz-axis).

The Polar Coordinate Transformation

The Transformation Formula and the Jacobian

The polar coordinate transformation

{x=ρcos⁡θy=ρsin⁡θ\begin{cases} x = \rho \cos\theta \\ y = \rho \sin\theta \end{cases}

The Jacobian determinant:

J=∂(x,y)∂(ρ,θ)=∣cos⁡θ−ρsin⁡θsin⁡θρcos⁡θ∣=ρcos⁡2θ+ρsin⁡2θ=ρJ = \frac{\partial(x,y)}{\partial(\rho,\theta)} = \begin{vmatrix} \cos\theta & -\rho\sin\theta \\ \sin\theta & \rho\cos\theta \end{vmatrix} = \rho\cos^2\theta + \rho\sin^2\theta = \rho

The area element: dσ=dx dy=∣J∣ dρ dθ=ρ dρ dθd\sigma = dx\,dy = |J| \, d\rho \, d\theta = \rho \, d\rho \, d\theta

The change of variables formula:

∬Df(x,y) dx dy=∬D′f(ρcos⁡θ,ρsin⁡θ)⋅ρ dρ dθ\iint_D f(x,y) \, dx\,dy = \iint_{D'} f(\rho\cos\theta, \rho\sin\theta) \cdot \rho \, d\rho \, d\theta

The Applicable Scenarios

The Limits for Common Polar Regions

RegionRectangular coordinatesLimits in polar coordinates
A disk (centred at the origin)x2+y2≤R2x^2+y^2 \leq R^20≤ρ≤R, 0≤θ≤2π0 \leq \rho \leq R, \, 0 \leq \theta \leq 2\pi
An annulusR12≤x2+y2≤R22R_1^2 \leq x^2+y^2 \leq R_2^2R1≤ρ≤R2, 0≤θ≤2πR_1 \leq \rho \leq R_2, \, 0 \leq \theta \leq 2\pi
A sectorx2+y2≤R2, α≤θ≤βx^2+y^2 \leq R^2, \, \alpha \leq \theta \leq \beta0≤ρ≤R, α≤θ≤β0 \leq \rho \leq R, \, \alpha \leq \theta \leq \beta
An off-centre circle (on the xx-axis)x2+y2≤2axx^2+y^2 \leq 2ax0≤ρ≤2acos⁡θ, −π/2≤θ≤π/20 \leq \rho \leq 2a\cos\theta, \, -\pi/2 \leq \theta \leq \pi/2
An off-centre circle (on the yy-axis)x2+y2≤2ayx^2+y^2 \leq 2ay0≤ρ≤2asin⁡θ, 0≤θ≤π0 \leq \rho \leq 2a\sin\theta, \, 0 \leq \theta \leq \pi
A cardioidρ≤a(1+cos⁡θ)\rho \leq a(1+\cos\theta)0≤ρ≤a(1+cos⁡θ), 0≤θ≤2π0 \leq \rho \leq a(1+\cos\theta), \, 0 \leq \theta \leq 2\pi

The Cylindrical Coordinate Transformation

The Transformation Formula and the Jacobian

The cylindrical coordinate transformation

{x=ρcos⁡θy=ρsin⁡θz=z\begin{cases} x = \rho \cos\theta \\ y = \rho \sin\theta \\ z = z \end{cases}

The Jacobian determinant:

J=∂(x,y,z)∂(ρ,θ,z)=∣cos⁡θ−ρsin⁡θ0sin⁡θρcos⁡θ0001∣=ρJ = \frac{\partial(x,y,z)}{\partial(\rho,\theta,z)} = \begin{vmatrix} \cos\theta & -\rho\sin\theta & 0 \\ \sin\theta & \rho\cos\theta & 0 \\ 0 & 0 & 1 \end{vmatrix} = \rho

The volume element: dv=dx dy dz=∣J∣ dρ dθ dz=ρ dρ dθ dzdv = dx\,dy\,dz = |J| \, d\rho \, d\theta \, dz = \rho \, d\rho \, d\theta \, dz

The change of variables formula:

∭Ωf(x,y,z) dv=∭Ω′f(ρcos⁡θ,ρsin⁡θ,z)⋅ρ dρ dθ dz\iiint_\Omega f(x,y,z) \, dv = \iiint_{\Omega'} f(\rho\cos\theta, \rho\sin\theta, z) \cdot \rho \, d\rho \, d\theta \, dz

The Applicable Scenarios

Determining the Limits in Cylindrical Coordinates

A triple integral in cylindrical coordinates usually has two possible orders of integration:

Method 1: integrating with respect to zz first (one then two) ∫θ1θ2dθ∫ρ1(θ)ρ2(θ)ρ dρ∫z1(ρ,θ)z2(ρ,θ)f(ρcos⁡θ,ρsin⁡θ,z) dz\int_{\theta_1}^{\theta_2} d\theta \int_{\rho_1(\theta)}^{\rho_2(\theta)} \rho \, d\rho \int_{z_1(\rho,\theta)}^{z_2(\rho,\theta)} f(\rho\cos\theta, \rho\sin\theta, z) \, dz

Method 2: integrating with respect to ρ,θ\rho, \theta first (two then one) ∫z1z2dz∬Dzf(ρcos⁡θ,ρsin⁡θ,z)ρ dρ dθ\int_{z_1}^{z_2} dz \iint_{D_z} f(\rho\cos\theta, \rho\sin\theta, z) \rho \, d\rho \, d\theta

where DzD_z is the cross-section perpendicular to the zz-axis, expressed in polar coordinates.

The Relation between the Polar and the Cylindrical Coordinates

The cylindrical coordinates can be viewed as the combination of “polar coordinates and the zz-axis”:

  • the polar coordinates (ρ,θ)(\rho, \theta) are used in the xOyxOy plane
  • the rectangular coordinate zz is kept in the zz-direction
  • the Jacobian determinant is the polar Jacobian ρ\rho (because there is no scaling in the zz-direction)

This is why the volume element in cylindrical coordinates is ρ dρ dθ dz\rho \, d\rho \, d\theta \, dz — the polar part contributes ρ dρ dθ\rho \, d\rho \, d\theta, and the zz-direction contributes dzdz.

Worked Examples

Example 1: Polar Coordinates for an Integral over a Disk

Compute ∬De−(x2+y2) dx dy\iint_D e^{-(x^2+y^2)} \, dx\,dy, where D:x2+y2≤R2D: x^2+y^2 \leq R^2.

polar coordinatesa circular domainthe Gaussian integralthe exponential function

Approach:

A disk together with an integrand containing x2+y2x^2+y^2: use the polar coordinate transformation.

Steps:

  1. Polar coordinates: 0≤ρ≤R, 0≤θ≤2π0 \leq \rho \leq R, \, 0 \leq \theta \leq 2\pi
  2. ∬De−(x2+y2)dx dy=∫02πdθ∫0Re−ρ2⋅ρ dρ=2π⋅[−12e−ρ2]0R=π(1−e−R2)\iint_D e^{-(x^2+y^2)} dx\,dy = \int_0^{2\pi} d\theta \int_0^R e^{-\rho^2} \cdot \rho \, d\rho = 2\pi \cdot \left[-\frac{1}{2}e^{-\rho^2}\right]_0^R = \pi(1 - e^{-R^2})

Answer: π(1−e−R2)\pi(1 - e^{-R^2})

(As R→∞R \to \infty, this gives the Poisson integral ∬R2e−(x2+y2)dx dy=π\iint_{\mathbb{R}^2} e^{-(x^2+y^2)} dx\,dy = \pi.)

Example 2: Cylindrical Coordinates for a Solid of Revolution

Compute ∭Ω(x2+y2) dv\iiint_\Omega (x^2+y^2) \, dv, where Ω\Omega is enclosed by x2+y2=2zx^2+y^2 = 2z and z=2z = 2.

cylindrical coordinatesa paraboloid of revolutionthe triple integral

Approach:

A region bounded by a paraboloid of revolution: use the cylindrical coordinate transformation.

Steps:

  1. The curve of intersection: x2+y2=4x^2+y^2 = 4, so the region of projection is D:x2+y2≤4D: x^2+y^2 \leq 4
  2. Cylindrical coordinates: 0≤θ≤2π, 0≤ρ≤2, ρ22≤z≤20 \leq \theta \leq 2\pi, \, 0 \leq \rho \leq 2, \, \frac{\rho^2}{2} \leq z \leq 2
  3. ∭Ω(x2+y2)dv=∫02πdθ∫02ρ dρ∫ρ2/22ρ2 dz=2π∫02ρ3(2−ρ22)dρ=2π∫02(2ρ3−ρ52)dρ=2π[ρ42−ρ612]02=2π(8−163)=16π3\iiint_\Omega (x^2+y^2) dv = \int_0^{2\pi} d\theta \int_0^2 \rho \, d\rho \int_{\rho^2/2}^2 \rho^2 \, dz = 2\pi \int_0^2 \rho^3\left(2 - \frac{\rho^2}{2}\right) d\rho = 2\pi \int_0^2 (2\rho^3 - \frac{\rho^5}{2}) d\rho = 2\pi\left[\frac{\rho^4}{2} - \frac{\rho^6}{12}\right]_0^2 = 2\pi\left(8 - \frac{16}{3}\right) = \frac{16\pi}{3}

Answer: 16π3\frac{16\pi}{3}

Example 3: An Off-Centre Circle in Polar Coordinates

Compute ∬Dx2+y2 dx dy\iint_D \sqrt{x^2+y^2} \, dx\,dy, where D:x2+y2≤2xD: x^2+y^2 \leq 2x.

polar coordinatesan off-centre circlea circular domain

Approach:

For the off-centre circle x2+y2≤2xx^2+y^2 \leq 2x, polar coordinates give ρ≤2cos⁡θ\rho \leq 2\cos\theta.

Steps:

  1. Polar coordinates: ρ2≤2ρcos⁡θ⇒ρ≤2cos⁡θ\rho^2 \leq 2\rho\cos\theta \Rightarrow \rho \leq 2\cos\theta
  2. Since ρ≥0\rho \geq 0, we need cos⁡θ≥0\cos\theta \geq 0, that is, −π2≤θ≤π2-\frac{\pi}{2} \leq \theta \leq \frac{\pi}{2}
  3. ∬Dx2+y2dx dy=∫−π/2π/2dθ∫02cos⁡θρ⋅ρ dρ=∫−π/2π/2[ρ33]02cos⁡θdθ=83∫−π/2π/2cos⁡3θ dθ=163∫0π/2cos⁡3θ dθ=163⋅23=329\iint_D \sqrt{x^2+y^2} dx\,dy = \int_{-\pi/2}^{\pi/2} d\theta \int_0^{2\cos\theta} \rho \cdot \rho \, d\rho = \int_{-\pi/2}^{\pi/2} \left[\frac{\rho^3}{3}\right]_0^{2\cos\theta} d\theta = \frac{8}{3}\int_{-\pi/2}^{\pi/2} \cos^3\theta \, d\theta = \frac{16}{3}\int_0^{\pi/2} \cos^3\theta \, d\theta = \frac{16}{3} \cdot \frac{2}{3} = \frac{32}{9}

Answer: 329\frac{32}{9}


Exercises

Exercise 1

Compute ∬Dln⁡(1+x2+y2) dx dy\iint_D \ln(1+x^2+y^2) \, dx\,dy, where D:x2+y2≤1D: x^2+y^2 \leq 1.

polar coordinatesa circular domainthe logarithmic functionintegration by parts

Approach:

An integral over a disk; after the polar coordinate transformation, use integration by parts.

Steps:

  1. Polar coordinates: 0≤ρ≤1, 0≤θ≤2π0 \leq \rho \leq 1, \, 0 \leq \theta \leq 2\pi
  2. ∬Dln⁡(1+ρ2)⋅ρ dρ dθ=2π∫01ρln⁡(1+ρ2)dρ\iint_D \ln(1+\rho^2) \cdot \rho \, d\rho \, d\theta = 2\pi \int_0^1 \rho\ln(1+\rho^2) d\rho
  3. Put t=1+ρ2t=1+\rho^2, so dt=2ρdρdt=2\rho d\rho: =π∫12ln⁡t dt=π[tln⁡t−t]12=π(2ln⁡2−1)= \pi \int_1^2 \ln t \, dt = \pi[t\ln t - t]_1^2 = \pi(2\ln 2 - 1)

Answer: π(2ln⁡2−1)\pi(2\ln 2 - 1)

Exercise 2

Compute ∭Ωz dv\iiint_\Omega z \, dv, where Ω:x2+y2+z2≤4, z≥x2+y2\Omega: x^2+y^2+z^2 \leq 4, \, z \geq \sqrt{x^2+y^2} (a spherical sector region).

cylindrical coordinatesa spherical sectora conical surfacea sphere

Approach:

A spherical sector region, which can be done with cylindrical coordinates (or with spherical coordinates).

Steps:

  1. The curve of intersection: substituting z=x2+y2z = \sqrt{x^2+y^2} into x2+y2+z2=4x^2+y^2+z^2=4 gives 2(x2+y2)=42(x^2+y^2)=4, that is, x2+y2=2x^2+y^2=2 and z=2z=\sqrt{2}
  2. Cylindrical coordinates: 0≤θ≤2π, 0≤ρ≤2, ρ≤z≤4−ρ20 \leq \theta \leq 2\pi, \, 0 \leq \rho \leq \sqrt{2}, \, \rho \leq z \leq \sqrt{4-\rho^2}
  3. ∭Ωz dv=∫02πdθ∫02ρ dρ∫ρ4−ρ2z dz=2π∫02ρ⋅12[(4−ρ2)−ρ2]dρ=π∫02ρ(4−2ρ2)dρ=π∫02(4ρ−2ρ3)dρ=π[2ρ2−ρ42]02=π(4−2)=2π\iiint_\Omega z \, dv = \int_0^{2\pi} d\theta \int_0^{\sqrt{2}} \rho \, d\rho \int_\rho^{\sqrt{4-\rho^2}} z \, dz = 2\pi \int_0^{\sqrt{2}} \rho \cdot \frac{1}{2}[(4-\rho^2) - \rho^2] d\rho = \pi \int_0^{\sqrt{2}} \rho(4-2\rho^2) d\rho = \pi \int_0^{\sqrt{2}} (4\rho - 2\rho^3) d\rho = \pi[2\rho^2 - \frac{\rho^4}{2}]_0^{\sqrt{2}} = \pi(4 - 2) = 2\pi

Answer: 2π2\pi


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
ρ\rhoPolar radiusrhoThe distance from the point to the origin / to the zz-axis
θ\thetaPolar anglethetaThe angle with the positive xx-axis
zzVertical coordinatez coordinateThe vertical coordinate in cylindrical coordinates, the same as in rectangular coordinates
ρ dρ dθ\rho \, d\rho \, d\thetaPolar area elementpolar area elementThe area element in polar coordinates
ρ dρ dθ dz\rho \, d\rho \, d\theta \, dzCylindrical volume elementcylindrical volume elementThe volume element in cylindrical coordinates

Key Terms

English termPronunciationNote
polar coordinate transformation/ˈpoʊlər koʊˈɔːrdɪneɪt ˌtrænsfərˈmeɪʃən/the transformation from rectangular coordinates to polar coordinates
cylindrical coordinate transformation/sɪˈlɪndrɪkəl koʊˈɔːrdɪneɪt ˌtrænsfərˈmeɪʃən/the transformation from rectangular coordinates to cylindrical coordinates
polar radius/ˈpoʊlər ˈreɪdiəs/the distance from a point to the origin
polar angle/ˈpoʊlər ˈæŋɡəl/the angle with the xx-axis
circular domain/ˈsɜːrkjələr doʊˈmeɪn/a circular region of integration
solid of revolution/ˈsɒlɪd əv ˌrɛvəˈluːʃən/the solid obtained by rotating a plane curve about an axis
eccentric circle/ɪkˈsɛntrɪk ˈsɜːrkəl/a circle whose centre is not the origin
cardioid/ˈkɑːrdiɔɪd/the polar curve ρ=a(1+cos⁡θ)\rho = a(1+\cos\theta)

Found an issue with this content?

Tell us what could be improved.