Flux and Circulation

Flux

The Definition of Flux

Flux

Suppose F⃗(x,y,z)\vec{F}(x,y,z) is a vector field defined on a region of space, and Σ\Sigma is an oriented surface. The flux of the vector field F⃗\vec{F} through the surface Σ\Sigma is defined as:

Φ=∬ΣF⃗⋅dS⃗=∬Σ(Pcos⁡α+Qcos⁡β+Rcos⁡γ) dS\Phi = \iint_\Sigma \vec{F} \cdot d\vec{S} = \iint_\Sigma (P\cos\alpha + Q\cos\beta + R\cos\gamma) \, dS

where dS⃗=n⃗ dS=(cos⁡α,cos⁡β,cos⁡γ)dSd\vec{S} = \vec{n} \, dS = (\cos\alpha, \cos\beta, \cos\gamma) dS is the directed area element, and n⃗\vec{n} is the unit normal vector of the surface.

The Physical Meaning of Flux

Computing the Flux

  1. A parametric surface: parametrise the surface and compute F⃗⋅(r⃗u×r⃗v) du dv\vec{F} \cdot (\vec{r}_u \times \vec{r}_v) \, du\,dv
  2. A surface given explicitly: z=z(x,y)z = z(x,y), use the projection formula ∬Dxy(−Pzx−Qzy+R) dx dy\iint_{D_{xy}} (-Pz_x - Qz_y + R) \, dx\,dy (for the upper side)
  3. A closed surface: use Gauss’s theorem to convert it into a triple integral

Circulation

The Definition of Circulation

Circulation

Suppose F⃗(x,y,z)\vec{F}(x,y,z) is a vector field and LL is an oriented closed curve. The circulation of the vector field F⃗\vec{F} along the closed curve LL is defined as:

Γ=∮LF⃗⋅dr⃗=∮LP dx+Q dy+R dz\Gamma = \oint_L \vec{F} \cdot d\vec{r} = \oint_L P \, dx + Q \, dy + R \, dz

where dr⃗=(dx,dy,dz)d\vec{r} = (dx, dy, dz) is the directed arc length element.

The Physical Meaning of Circulation

Computing the Circulation

  1. A parametric curve: parametrise the curve and compute ∫abF⃗(r⃗(t))⋅r⃗′(t) dt\int_a^b \vec{F}(\vec{r}(t)) \cdot \vec{r}'(t) \, dt
  2. A plane closed curve: use Green’s theorem to convert it into a double integral
  3. A space closed curve: use Stokes’s theorem to convert it into a surface integral

A Unified View of the Three Theorems from the Point of View of a Vector Field

Theorem1

From the point of view of a vector field, the three theorems can be stated uniformly as follows.

Gauss’s theorem (the divergence theorem)

∯ΣF⃗⋅dS⃗=∭Ω(∇⋅F⃗) dv\oiint_\Sigma \vec{F} \cdot d\vec{S} = \iiint_\Omega (\nabla \cdot \vec{F}) \, dv The flux through a closed surface = the volume integral of the divergence

Stokes’s theorem (the curl theorem)

∮LF⃗⋅dr⃗=∬Σ(∇×F⃗)⋅dS⃗\oint_L \vec{F} \cdot d\vec{r} = \iint_\Sigma (\nabla \times \vec{F}) \cdot d\vec{S} The circulation along a closed curve = the flux of the curl

Green’s theorem (the two-dimensional curl theorem)

∮LP dx+Q dy=∬D(∂Q∂x−∂P∂y)dx dy\oint_L P \, dx + Q \, dy = \iint_D \left( \frac{\partial Q}{\partial x} - \frac{\partial P}{\partial y} \right) dx\,dy The circulation along a plane closed curve = the area integral of the two-dimensional curl

Green’s theorem is the special case of Stokes’s theorem on a plane (with the surface taken to be a region of the xOyxOy plane).

A Summary of the Integral Theorems of Vector Fields

TheoremFormulaThe integrals it relatesThe core operatorPhysical meaning
Newton–Leibniz∫abf′(x)dx=f(b)−f(a)\int_a^b f'(x)dx = f(b)-f(a)a definite integral ↔ the endpoint valuesthe derivative—
Green’s theorem∮LPdx+Qdy=∬D(∂Q∂x−∂P∂y)dxdy\oint_L Pdx+Qdy = \iint_D (\frac{\partial Q}{\partial x}-\frac{\partial P}{\partial y})dxdya line integral ↔ a double integralthe two-dimensional curlcirculation = flux of the curl
Gauss’s theorem∯ΣF⃗⋅dS⃗=∭Ω(∇⋅F⃗)dv\oiint_\Sigma \vec{F}\cdot d\vec{S} = \iiint_\Omega (\nabla\cdot\vec{F})dva surface integral ↔ a triple integralthe divergenceflux = volume integral of the divergence
Stokes’s theorem∮LF⃗⋅dr⃗=∬Σ(∇×F⃗)⋅dS⃗\oint_L \vec{F}\cdot d\vec{r} = \iint_\Sigma (\nabla\times\vec{F})\cdot d\vec{S}a line integral ↔ a surface integralthe curlcirculation = flux of the curl

Worked Examples

Example 1: Computing a Flux

Compute the flux of the vector field F⃗=(x,y,z)\vec{F} = (x, y, z) through the outer side of the sphere x2+y2+z2=a2x^2+y^2+z^2 = a^2.

fluxGauss's theorema spherethe divergence

Approach:

For the outer side of a closed surface, use Gauss’s theorem. The divergence is the constant 3.

Steps:

  1. ∇⋅F⃗=∂x∂x+∂y∂y+∂z∂z=3\nabla \cdot \vec{F} = \frac{\partial x}{\partial x} + \frac{\partial y}{\partial y} + \frac{\partial z}{\partial z} = 3
  2. By Gauss’s theorem: Φ=∯ΣF⃗⋅dS⃗=∭Ω3 dv=3×43πa3=4πa3\Phi = \oiint_\Sigma \vec{F} \cdot d\vec{S} = \iiint_\Omega 3 \, dv = 3 \times \frac{4}{3}\pi a^3 = 4\pi a^3

Answer: 4πa34\pi a^3

Example 2: Computing a Circulation

Compute the circulation of the vector field F⃗=(−y,x,0)\vec{F} = (-y, x, 0) along the circle x2+y2=a2, z=0x^2+y^2 = a^2, \, z=0 (in the counterclockwise direction).

circulationGreen's theorema circlethe curl

Approach:

A plane closed curve: use Green’s theorem (or Stokes’s theorem).

Steps:

Method 1: Green’s theorem

  1. P=−y, Q=xP = -y, \, Q = x
  2. ∂Q∂x−∂P∂y=1−(−1)=2\frac{\partial Q}{\partial x} - \frac{\partial P}{\partial y} = 1 - (-1) = 2
  3. Γ=∮L−y dx+x dy=∬D2 dx dy=2×πa2=2πa2\Gamma = \oint_L -y \, dx + x \, dy = \iint_D 2 \, dx\,dy = 2 \times \pi a^2 = 2\pi a^2

Method 2: parametric equations

  1. x=acos⁡t, y=asin⁡t, t:0→2πx = a\cos t, \, y = a\sin t, \, t: 0 \to 2\pi
  2. dx=−asin⁡t dt, dy=acos⁡t dtdx = -a\sin t \, dt, \, dy = a\cos t \, dt
  3. Γ=∫02π[(−asin⁡t)(−asin⁡t)+(acos⁡t)(acos⁡t)]dt=∫02πa2(sin⁡2t+cos⁡2t)dt=a2∫02πdt=2πa2\Gamma = \int_0^{2\pi} [(-a\sin t)(-a\sin t) + (a\cos t)(a\cos t)] dt = \int_0^{2\pi} a^2(\sin^2 t+\cos^2 t) dt = a^2 \int_0^{2\pi} dt = 2\pi a^2

Answer: 2πa22\pi a^2

Example 3: Using Stokes’s Theorem for a Space Curve Integral

Compute ∮L(y−z) dx+(z−x) dy+(x−y) dz\oint_L (y-z) \, dx + (z-x) \, dy + (x-y) \, dz, where LL is the curve of intersection of the cylinder x2+y2=a2x^2+y^2 = a^2 with the plane x+y+z=0x+y+z = 0, taken in the counterclockwise direction as seen from the positive xx-axis.

Stokes's theoremthe line integral along a space curvecirculationthe curl

Approach:

A space closed curve: use Stokes’s theorem to convert it into a surface integral. The curl is a constant vector.

Steps:

  1. P=y−z, Q=z−x, R=x−yP = y-z, \, Q = z-x, \, R = x-y
  2. The curl: ∇×F⃗=(−1−1,−1−1,−1−1)=(−2,−2,−2)\nabla \times \vec{F} = (-1-1, -1-1, -1-1) = (-2, -2, -2)
  3. Take Σ\Sigma to be the elliptical face in the plane x+y+z=0x+y+z=0 bounded by LL. By the right-hand rule, the normal vector points towards the side x+y+z>0x+y+z>0, that is, n⃗=(1,1,1)3\vec{n} = \frac{(1,1,1)}{\sqrt{3}}.
  4. (∇×F⃗)⋅n⃗=(−2,−2,−2)⋅(1,1,1)3=−63=−23(\nabla \times \vec{F}) \cdot \vec{n} = \frac{(-2,-2,-2)\cdot(1,1,1)}{\sqrt{3}} = \frac{-6}{\sqrt{3}} = -2\sqrt{3}
  5. The area of the ellipse: its projection onto the xOyxOy plane is the disk x2+y2≤a2x^2+y^2 \leq a^2, of area πa2\pi a^2. The cosine of the angle between the normal of the plane and the zz-axis is cos⁡γ=13\cos\gamma = \frac{1}{\sqrt{3}}. The area of the ellipse =πa2cos⁡γ=3πa2= \frac{\pi a^2}{\cos\gamma} = \sqrt{3}\pi a^2.
  6. The integral =(∇×F⃗)⋅n⃗×the area of the ellipse=−23×3πa2=−6πa2= (\nabla \times \vec{F}) \cdot \vec{n} \times \text{the area of the ellipse} = -2\sqrt{3} \times \sqrt{3}\pi a^2 = -6\pi a^2

Answer: −6πa2-6\pi a^2


Exercises

Exercise 1

Compute the flux of the vector field F⃗=(x2,y2,z2)\vec{F} = (x^2, y^2, z^2) through the outer side of the surface of the cube 0≤x,y,z≤10 \leq x,y,z \leq 1.

fluxGauss's theorema cubethe divergence

Approach:

For the outer side of a closed surface, use Gauss’s theorem.

Steps:

  1. ∇⋅F⃗=2x+2y+2z\nabla \cdot \vec{F} = 2x + 2y + 2z
  2. Φ=∭Ω2(x+y+z)dv=2∫01∫01∫01(x+y+z)dxdydz\Phi = \iiint_\Omega 2(x+y+z) dv = 2\int_0^1\int_0^1\int_0^1 (x+y+z) dxdydz
  3. By symmetry, ∭x dv=∭y dv=∭z dv=12\iiint x \, dv = \iiint y \, dv = \iiint z \, dv = \frac{1}{2}
  4. Φ=2×3×12=3\Phi = 2 \times 3 \times \frac{1}{2} = 3

Answer: 33

Exercise 2

Compute the circulation of the vector field F⃗=(x2−y,4z,x2)\vec{F} = (x^2-y, 4z, x^2) along the closed curve LL, where LL is the curve of intersection of the cone z=x2+y2z = \sqrt{x^2+y^2} with the plane z=2z=2, taken in the counterclockwise direction as seen from the positive zz-axis.

Stokes's theoremcirculationa space curvethe curl

Approach:

Use Stokes’s theorem, taking the disk in the plane z=2z=2.

Steps:

  1. P=x2−y, Q=4z, R=x2P = x^2-y, \, Q = 4z, \, R = x^2
  2. The curl: ∂R∂y−∂Q∂z=0−4=−4\frac{\partial R}{\partial y}-\frac{\partial Q}{\partial z} = 0-4 = -4, ∂P∂z−∂R∂x=0−2x=−2x\frac{\partial P}{\partial z}-\frac{\partial R}{\partial x} = 0-2x = -2x, ∂Q∂x−∂P∂y=0−(−1)=1\frac{\partial Q}{\partial x}-\frac{\partial P}{\partial y} = 0-(-1) = 1
  3. ∇×F⃗=(−4,−2x,1)\nabla \times \vec{F} = (-4, -2x, 1)
  4. Take Σ:z=2, x2+y2≤4\Sigma: z=2, \, x^2+y^2 \leq 4, the upper side, with normal vector n⃗=(0,0,1)\vec{n} = (0,0,1)
  5. (∇×F⃗)⋅n⃗=1(\nabla \times \vec{F}) \cdot \vec{n} = 1
  6. Γ=∬Σ1 dS=the area of the disk=4π\Gamma = \iint_\Sigma 1 \, dS = \text{the area of the disk} = 4\pi

Answer: 4π4\pi


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
Φ\PhiFluxfluxThe amount of the vector field passing through a surface
Γ\GammaCirculationcirculationThe amount of the vector field passing along a closed curve
dS⃗d\vec{S}Directed area elementdirected surface elementn⃗ dS\vec{n} \, dS
dr⃗d\vec{r}Directed arc elementdirected arc element(dx,dy,dz)(dx, dy, dz)
n⃗\vec{n}Unit normal vectorunit normalThe unit normal vector of the surface
α,β,γ\alpha,\beta,\gammaDirection anglesdirection anglesThe angles of the normal vector with the coordinate axes
Σ\SigmaSurfacesurfaceAn oriented surface
Ω\OmegaRegion of spaceregionThe region enclosed by the closed surface

Key Terms

English termPronunciationNote
flux/flʌks/the amount of a vector field passing through a surface
electric flux/ɪˈlɛktrɪk flʌks/the flux of the electric field through a surface
magnetic flux/mæɡˈnɛtɪk flʌks/the flux of the magnetic field through a surface
flow rate/floʊ reɪt/the flux of a velocity field
circulation/ˌsɜːrkjəˈleɪʃən/the amount of a vector field along a closed curve
vortex/ˈvɔːrtɛks/the region of rotation in a velocity field
divergence theorem/daɪˈvɜːrdʒəns ˈθɪərəm/that is, Gauss’s theorem
curl theorem/kɜːrl ˈθɪərəm/that is, Stokes’s theorem
generalized Stokes theorem/ˈdʒɛnrəlaɪzd stoʊks ˈθɪərəm/the integral theorem for the exterior derivative of differential forms
exterior derivative/ɪkˈstɪəriər dɪˈrɪvətɪv/the differential operation on differential forms
Ampère’s circuital law/æmˈpɛərz ˈsɜːrkjɪtəl lɔː/the relation between the circulation of the magnetic field and the current
Faraday’s law/ˈfærədeɪz lɔː/the relation between the circulation of the electric field and the change in magnetic flux

Found an issue with this content?

Tell us what could be improved.