The Concept and Properties of the Double Integral

From the Definite Integral to the Double Integral

The definite integral ∫abf(x) dx\int_a^b f(x) \, dx of a function of one variable describes “the area under the curve y=f(x)y=f(x)”. So when we face a two-variable function z=f(x,y)z=f(x,y) defined on a region of the plane, how should “the volume under the surface” be defined and computed? This is the core problem that the double integral solves.

The Definition of the Double Integral

Double integral

Let f(x,y)f(x, y) be a bounded function defined on a bounded closed region DD. Divide the region DD arbitrarily into nn small regions Δσ1,Δσ2,…,Δσn\Delta \sigma_1, \Delta \sigma_2, \ldots, \Delta \sigma_n, where Δσi\Delta \sigma_i denotes the ii-th small region together with its area. In each small region Δσi\Delta \sigma_i choose an arbitrary point (ξi,ηi)(\xi_i, \eta_i), form the product f(ξi,ηi)Δσif(\xi_i, \eta_i) \Delta \sigma_i, and sum:

∑i=1nf(ξi,ηi)Δσi\sum_{i=1}^n f(\xi_i, \eta_i) \Delta \sigma_i

If, as the maximum λ\lambda of the diameters of the small regions tends to 0, this sum has a limit which is independent of how the region was divided and of how the points (ξi,ηi)(\xi_i, \eta_i) were chosen, then this limit is called the double integral of f(x,y)f(x, y) over the region DD, written:

∬Df(x,y) dσor∬Df(x,y) dx dy\iint_D f(x, y) \, d\sigma \quad \text{or} \quad \iint_D f(x, y) \, dx\, dy

Here f(x,y)f(x,y) is called the integrand, DD is called the region of integration, and dσd\sigma is called the area element.

Integrability

If f(x,y)f(x,y) is continuous on the bounded closed region DD, then f(x,y)f(x,y) is integrable on DD. More generally, if f(x,y)f(x,y) is bounded on DD and has only finitely many points of discontinuity, then f(x,y)f(x,y) is integrable on DD.

The Geometric Meaning

When f(x,y)≥0f(x, y) \geq 0, the double integral ∬Df(x,y) dx dy\iint_D f(x, y) \, dx\, dy is the volume of the cylinder with curved top whose base is the region DD and whose top is the surface z=f(x,y)z = f(x, y).

  • If f(x,y)=1f(x,y) = 1, then ∬D1 dσ=SD\iint_D 1 \, d\sigma = S_D, the area of the region DD
  • If f(x,y)f(x,y) takes both positive and negative values on DD, the double integral is the algebraic sum of the volumes of the parts (positive above the xOyxOy-plane, negative below it)
The volume of a cylinder with a curved top

V=∬Df(x,y) dx dy(f(x,y)≥0)V = \iint_D f(x,y) \, dx\, dy \quad (f(x,y) \geq 0)

The Properties of the Double Integral

Theorem1

The double integral has the following basic properties:

  1. Linearity: ∬D[af(x,y)+bg(x,y)] dσ=a∬Df dσ+b∬Dg dσ\iint_D [af(x,y) + bg(x,y)] \, d\sigma = a\iint_D f \, d\sigma + b\iint_D g \, d\sigma

  2. Additivity over regions: if D=D1∪DD2D = D_1 \cup D_{D_2} and D1∩D2=∅D_1 \cap D_2 = \emptyset (apart from the boundary), then ∬Df dσ=∬D1f dσ+∬D2f dσ\iint_D f \, d\sigma = \iint_{D_1} f \, d\sigma + \iint_{D_2} f \, d\sigma

  3. The comparison property: if f(x,y)≤g(x,y)f(x,y) \leq g(x,y) on DD, then ∬Df dσ≤∬Dg dσ\iint_D f \, d\sigma \leq \iint_D g \, d\sigma In particular, ∣∬Df dσ∣≤∬D∣f∣ dσ\left|\iint_D f \, d\sigma\right| \leq \iint_D |f| \, d\sigma

  4. The estimation property: let m,Mm, M be the minimum and the maximum of f(x,y)f(x,y) on DD, and let SS be the area of DD. Then mS≤∬Df dσ≤MSmS \leq \iint_D f \, d\sigma \leq MS

  5. The mean value theorem for integrals: if f(x,y)f(x,y) is continuous on the closed region DD and SS is the area of DD, then there exists at least one point (ξ,η)∈D(\xi, \eta) \in D such that ∬Df(x,y) dσ=f(ξ,η)⋅S\iint_D f(x,y) \, d\sigma = f(\xi, \eta) \cdot S

Worked Examples

Example 1: Using the Geometric Meaning

Without computing, determine the value of ∬x2+y2≤11−x2−y2 dσ\iint_{x^2+y^2 \leq 1} \sqrt{1-x^2-y^2} \, d\sigma.

the double integralthe geometric meaningthe volume of a sphere

Approach:

The integrand z=1−x2−y2z = \sqrt{1-x^2-y^2} describes the upper hemisphere of radius 1, and the region of integration is the unit disk. Hence the double integral is the volume of the upper hemisphere.

Steps:

  1. The integrand z=1−x2−y2≥0z = \sqrt{1-x^2-y^2} \geq 0, so the geometric meaning applies
  2. z2=1−x2−y2z^2 = 1 - x^2 - y^2, that is, x2+y2+z2=1x^2 + y^2 + z^2 = 1 (z≥0z \geq 0), which is the upper hemisphere of radius 1
  3. The volume of the sphere Vsphere=43πR3=43πV_{\text{sphere}} = \frac{4}{3}\pi R^3 = \frac{4}{3}\pi
  4. The volume of the upper hemisphere is 12×43π=23π\frac{1}{2} \times \frac{4}{3}\pi = \frac{2}{3}\pi

Answer: 23π\frac{2}{3}\pi

Example 2: Estimating the Integral with the Estimation Property

Estimate the value of ∬D(x2+y2+1) dσ\iint_D (x^2 + y^2 + 1) \, d\sigma, where D:0≤x≤1,0≤y≤1D: 0 \leq x \leq 1, 0 \leq y \leq 1.

the double integralthe estimation propertya rectangular region

Approach:

First find the maximum and the minimum of the integrand over the region, and then apply the estimation property.

Steps:

  1. On DD, 0≤x≤10 \leq x \leq 1 and 0≤y≤10 \leq y \leq 1
  2. Hence 0≤x2+y2≤20 \leq x^2 + y^2 \leq 2, and so 1≤x2+y2+1≤31 \leq x^2 + y^2 + 1 \leq 3
  3. The area of the region DD is S=1×1=1S = 1 \times 1 = 1
  4. By the estimation property: 1×1≤∬D(x2+y2+1) dσ≤3×11 \times 1 \leq \iint_D (x^2+y^2+1) \, d\sigma \leq 3 \times 1

Answer: 1≤∬D(x2+y2+1) dσ≤31 \leq \iint_D (x^2+y^2+1) \, d\sigma \leq 3

(The exact value is in fact 53\frac{5}{3}, which lies within the estimated range.)


Exercises

Exercise 1

Using the geometric meaning, find ∬x2+y2≤43 dσ\iint_{x^2+y^2 \leq 4} 3 \, d\sigma.

the double integralthe geometric meaningarea

Approach:

The integrand is the constant 3, so the double integral equals 3×3 \times the area of the region.

Steps:

  1. The region of integration x2+y2≤4x^2 + y^2 \leq 4 is the disk of radius 2
  2. The area of the disk S=πr2=4πS = \pi r^2 = 4\pi
  3. ∬D3 dσ=3×S=3×4π=12π\iint_D 3 \, d\sigma = 3 \times S = 3 \times 4\pi = 12\pi

Answer: 12π12\pi

Exercise 2

Compare ∬D(x+y)2 dσ\iint_D (x+y)^2 \, d\sigma with ∬D(x+y)3 dσ\iint_D (x+y)^3 \, d\sigma, where DD is bounded by the xx-axis, the yy-axis and the line x+y=1x+y=1.

the double integralthe comparison propertya triangular region

Approach:

Compare the two integrands over the region of integration, and then apply the comparison property.

Steps:

  1. On the region DD, x≥0,y≥0x \geq 0, y \geq 0 and x+y≤1x+y \leq 1
  2. Hence 0≤x+y≤10 \leq x+y \leq 1
  3. When 0≤t≤10 \leq t \leq 1 we have t2≥t3t^2 \geq t^3 (because t2−t3=t2(1−t)≥0t^2 - t^3 = t^2(1-t) \geq 0)
  4. So on DD, (x+y)2≥(x+y)3(x+y)^2 \geq (x+y)^3
  5. By the comparison property: ∬D(x+y)2 dσ≥∬D(x+y)3 dσ\iint_D (x+y)^2 \, d\sigma \geq \iint_D (x+y)^3 \, d\sigma

Answer: ∬D(x+y)2 dσ≥∬D(x+y)3 dσ\iint_D (x+y)^2 \, d\sigma \geq \iint_D (x+y)^3 \, d\sigma


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
∬D\iint_DDouble integraldouble integral over DThe double integral operator over the region DD
dσd\sigmaArea elementarea elementThe two-dimensional area element, independent of the coordinate system
dx dydx\,dyCartesian area elementCartesian area elementThe area element in rectangular coordinates
DDRegion of integrationregion of integrationThe domain of the double integral (a closed region of the plane)
λ\lambdaMesh sizemesh sizeThe maximum of the diameters of the small regions
SSAreaareaThe area of the plane region DD

Key Terms

English termPronunciationNote
double integral/ˈdʌbl ˈɪntɪɡrəl/the integral of a function of two variables over a plane region
region of integration/ˈriːdʒən əv ˌɪntɪˈɡreɪʃən/the domain of the integral
area element/ˈɛəriə ˈɛləmənt/the differential of plane area
cylinder with curved top/ˈsɪləndər wɪð kɜːrvd tɒp/a solid whose base is a plane region and whose top is a curved surface
integrability/ˌɪntɪɡrəˈbɪləti/the property that the integral exists
mean value theorem for integrals/miːn ˈvæljuː ˈθɪərəm fɔːr ˈɪntɪɡrəlz/the integral equals the value of the function at some point times the area of the region

Found an issue with this content?

Tell us what could be improved.