Comprehensive Geometric Applications

Computing Angles

The common angle formulas
  1. The angle between two surfaces (the angle between the tangent planes at a point of the curve of intersection, that is, the angle between the normal vectors): cos⁡θ=∣∇F1⋅∇F2∣∣∇F1∣⋅∣∇F2∣\cos\theta = \frac{|\nabla F_1 \cdot \nabla F_2|}{|\nabla F_1| \cdot |\nabla F_2|}

  2. The angle between a curve and a surface (the angle between the tangent vector of the curve and the tangent plane of the surface, that is, the complement of the angle between the tangent vector and the normal vector): sin⁡φ=∣T⃗⋅n⃗∣∣T⃗∣⋅∣n⃗∣\sin\varphi = \frac{|\vec{T} \cdot \vec{n}|}{|\vec{T}| \cdot |\vec{n}|}

  3. The angle between two curves (the angle between the tangent vectors at a point of intersection): cos⁡θ=∣T⃗1⋅T⃗2∣∣T⃗1∣⋅∣T⃗2∣\cos\theta = \frac{|\vec{T}_1 \cdot \vec{T}_2|}{|\vec{T}_1| \cdot |\vec{T}_2|}

  4. The angle between a line and a plane: sin⁡φ=∣s⃗⋅n⃗∣∣s⃗∣⋅∣n⃗∣\sin\varphi = \frac{|\vec{s} \cdot \vec{n}|}{|\vec{s}| \cdot |\vec{n}|}

Typical Comprehensive Problems

Example 1: Two Orthogonal Surfaces

Prove that the sphere x2+y2+z2=R2x^2 + y^2 + z^2 = R^2 and the cone x2+y2=a2z2x^2 + y^2 = a^2 z^2 are orthogonal at every point of their curve of intersection.

orthogonal surfacesthe anglethe normal vectorsa proof

Approach:

Two surfaces are orthogonal exactly when their normal vectors are orthogonal, that is, when the dot product of the normal vectors is zero.

Steps:

  1. Put F=x2+y2+z2−R2F = x^2+y^2+z^2-R^2 and G=x2+y2−a2z2G = x^2+y^2-a^2z^2
  2. ∇F=(2x,2y,2z)\nabla F = (2x, 2y, 2z) and ∇G=(2x,2y,−2a2z)\nabla G = (2x, 2y, -2a^2z)
  3. On the curve of intersection (where both equations hold), the dot product of the normal vectors is: ∇F⋅∇G=4x2+4y2−4a2z2=4(x2+y2−a2z2)=4⋅0=0\nabla F \cdot \nabla G = 4x^2 + 4y^2 - 4a^2z^2 = 4(x^2+y^2-a^2z^2) = 4 \cdot 0 = 0 (by the equation of the cone)
  4. Since the dot product of the normal vectors is zero, the two surfaces are orthogonal at every point of the curve of intersection.

Answer: the two surfaces are orthogonal along the curve of intersection.

Example 2: The Angle Between Two Traces on a Surface

On the surface z=xyz = xy, find the angle between the two traces through the point (1,1,1)(1, 1, 1) that are parallel to the xOzxOz plane and the yOzyOz plane respectively.

the angletracesthe tangent vectorsa surface

Approach:

The tangent vectors of the two traces are the two partial-derivative directions; find these two vectors and then compute the angle.

Steps:

  1. The trace parallel to the xOzxOz plane: y=1y=1, that is, {z=xy=1\begin{cases} z=x \\ y=1 \end{cases}, with the parametric equations x=t,y=1,z=tx=t, y=1, z=t, and the tangent vector T⃗1=(1,0,1)\vec{T}_1 = (1, 0, 1)
  2. The trace parallel to the yOzyOz plane: x=1x=1, that is, {z=yx=1\begin{cases} z=y \\ x=1 \end{cases}, with the parametric equations x=1,y=t,z=tx=1, y=t, z=t, and the tangent vector T⃗2=(0,1,1)\vec{T}_2 = (0, 1, 1)
  3. The cosine of the angle: cos⁡θ=∣T⃗1⋅T⃗2∣∣T⃗1∣∣T⃗2∣=∣0+0+1∣2⋅2=12\cos\theta = \frac{|\vec{T}_1 \cdot \vec{T}_2|}{|\vec{T}_1||\vec{T}_2|} = \frac{|0+0+1|}{\sqrt{2}\cdot\sqrt{2}} = \frac{1}{2}
  4. Hence θ=π3\theta = \frac{\pi}{3} (60 degrees)

Answer: the angle between the two traces is π3\frac{\pi}{3} (60 degrees).

Example 3: The Shortest Distance from a Point to a Surface

Find the shortest distance from the origin to the surface (x−y)2−z2=1(x-y)^2 - z^2 = 1.

the shortest distancea constrained extremuma surfacethe Lagrange multiplier method

Approach:

Use the Lagrange multiplier method to find the minimum of the square of the distance over the constraint surface.

Steps:

  1. For a point (x,y,z)(x,y,z) on the surface, the square of the distance is f=x2+y2+z2f = x^2+y^2+z^2, with the constraint (x−y)2−z2=1(x-y)^2-z^2=1
  2. L=x2+y2+z2+λ[(x−y)2−z2−1]L = x^2+y^2+z^2 + \lambda[(x-y)^2-z^2-1]
  3. Lx=2x+2λ(x−y)=0L_x = 2x+2\lambda(x-y)=0, Ly=2y−2λ(x−y)=0L_y = 2y-2\lambda(x-y)=0 and Lz=2z−2λz=0L_z = 2z-2\lambda z=0
  4. From Lz=0L_z=0: 2z(1−λ)=02z(1-\lambda)=0, so either z=0z=0 or λ=1\lambda=1
  5. If λ=1\lambda=1: from Lx=0L_x=0 we get x+x−y=0x+x-y=0, that is, 2x=y2x=y; from Ly=0L_y=0 we get y−(x−y)=0y-(x-y)=0, that is, 2y=x2y=x; combining gives x=y=0x=y=0, and substituting into the constraint gives −z2=1-z^2=1, with no solution.
  6. Hence z=0z=0: the constraint becomes (x−y)2=1(x-y)^2=1, that is, x−y=±1x-y=\pm1
  7. From Lx=0,Ly=0L_x=0, L_y=0: x=−λ(x−y)x = -\lambda(x-y) and y=λ(x−y)y = \lambda(x-y), so x=−yx = -y
  8. Combining x=−yx=-y with x−y=±1x-y=\pm1: 2x=±12x=\pm1, so x=±12x=\pm\frac{1}{2} and y=∓12y=\mp\frac{1}{2}
  9. The square of the distance f=14+14+0=12f = \frac{1}{4}+\frac{1}{4}+0 = \frac{1}{2}
  10. The shortest distance =12=22= \sqrt{\frac{1}{2}} = \frac{\sqrt{2}}{2}

Answer: the shortest distance is 22\frac{\sqrt{2}}{2}.

Example 4: The Volume Enclosed by the Tangent Plane and the Coordinate Planes

Find the minimum of the volume of the tetrahedron enclosed by the tangent plane at a point of the surface xyz=1xyz = 1 (x>0,y>0,z>0x>0,y>0,z>0) and the three coordinate planes.

the tangent planethe volume of a tetrahedronthe maximum and minimum valuea constrained extremum

Approach:

The volume of the tetrahedron is a function of the coordinates of the point of tangency, and the extremum condition shows that it does not depend on the point at all and is identically constant.

Steps:

  1. Put F=xyz−1F=xyz-1, so ∇F=(yz,xz,xy)\nabla F=(yz,xz,xy)
  2. At the point of tangency (x0,y0,z0)(x_0,y_0,z_0) (where x0y0z0=1x_0y_0z_0=1), the tangent plane is y0z0(x−x0)+x0z0(y−y0)+x0y0(z−z0)=0y_0z_0(x-x_0)+x_0z_0(y-y_0)+x_0y_0(z-z_0)=0
  3. Simplifying: y0z0x+x0z0y+x0y0z=3x0y0z0=3y_0z_0 x + x_0z_0 y + x_0y_0 z = 3x_0y_0z_0 = 3
  4. The intercept form: x3x0+y3y0+z3z0=1\frac{x}{3x_0} + \frac{y}{3y_0} + \frac{z}{3z_0} = 1
  5. The intercepts: 3x0,3y0,3z03x_0, 3y_0, 3z_0, so the volume of the tetrahedron is V=16⋅27x0y0z0=276=92V = \frac{1}{6} \cdot 27x_0y_0z_0 = \frac{27}{6} = \frac{9}{2}
  6. The volume does not depend on the position of the point of tangency; it is always 92\frac{9}{2}.

Answer: the volume enclosed by the tangent plane and the coordinate planes is always 92\frac{9}{2}, independent of the point of tangency, so the minimum is 92\frac{9}{2} as well.


Exercises

Exercise 1

Prove that the paraboloid of revolution z=x2+y2z = x^2 + y^2 and the ellipsoid x22+y2+z2=3\frac{x^2}{2} + y^2 + z^2 = 3 are orthogonal at the point (1,0,1)(1, 0, 1).

orthogonal surfacesthe normal vectorsa proof

Approach:

Just as in the example: compute the two normal vectors and verify that they are orthogonal.

Steps:

  1. Put F=x2+y2−zF = x^2+y^2-z and G=x22+y2+z2−3G = \frac{x^2}{2}+y^2+z^2-3
  2. ∇F=(2x,2y,−1)\nabla F = (2x, 2y, -1) and ∇G=(x,2y,2z)\nabla G = (x, 2y, 2z)
  3. At (1,0,1)(1,0,1): ∇F=(2,0,−1)\nabla F = (2,0,-1) and ∇G=(1,0,2)\nabla G = (1,0,2)
  4. ∇F⋅∇G=2×1+0+(−1)×2=0\nabla F \cdot \nabla G = 2\times1 + 0 + (-1)\times2 = 0
  5. The normal vectors are orthogonal, so the two surfaces are orthogonal at that point.

Answer: the two surfaces are orthogonal at (1,0,1)(1,0,1).

Exercise 2

Find the angle between the tangent line of the curve {x2+y2+z2=2x+y+z=0\begin{cases} x^2 + y^2 + z^2 = 2 \\ x + y + z = 0 \end{cases} at the point (1,0,−1)(1, 0, -1) and the zz-axis.

the anglethe tangent linea space curvethe z-axis

Approach:

The tangent vector is the cross product of the two normal vectors, and then you compute its angle with the direction of the zz-axis.

Steps:

  1. Put F=x2+y2+z2−2F=x^2+y^2+z^2-2 and G=x+y+zG=x+y+z
  2. ∇F=(2x,2y,2z)\nabla F=(2x,2y,2z) and ∇G=(1,1,1)\nabla G=(1,1,1)
  3. At (1,0,−1)(1,0,-1): ∇F=(2,0,−2)\nabla F=(2,0,-2) and ∇G=(1,1,1)\nabla G=(1,1,1)
  4. The tangent vector T⃗=∇F×∇G=∣i⃗j⃗k⃗20−2111∣=(2,−4,2)\vec{T}=\nabla F\times\nabla G=\begin{vmatrix}\vec{i}&\vec{j}&\vec{k}\\2&0&-2\\1&1&1\end{vmatrix}=(2,-4,2), and we may take (1,−2,1)(1,-2,1)
  5. The direction vector of the zz-axis is k⃗=(0,0,1)\vec{k}=(0,0,1)
  6. The cosine of the angle: cos⁡θ=∣T⃗⋅k⃗∣∣T⃗∣∣k⃗∣=11+4+1=16\cos\theta = \frac{|\vec{T}\cdot\vec{k}|}{|\vec{T}||\vec{k}|} = \frac{1}{\sqrt{1+4+1}} = \frac{1}{\sqrt{6}}
  7. θ=arccos⁡16\theta = \arccos\frac{1}{\sqrt{6}}

Answer: the angle between the tangent line and the zz-axis is arccos⁡16\arccos\frac{1}{\sqrt{6}}.


Summary

Symbols Used in This Article

SymbolTypePronunciation/ExplanationMeaning in This Article
θ\thetaAnglethetaThe angle between two vectors, surfaces or curves
φ\varphiAnglephiThe angle between a line and a plane
n⃗\vec{n}Normal vectornormal vectorThe normal vector of a surface or a plane
T⃗\vec{T}Tangent vectortangent vectorThe tangent vector of a curve
VVVolumevolumeThe volume of a tetrahedron
s⃗\vec{s}Direction vectordirection vectorThe direction vector of a line

Found an issue with this content?

Tell us what could be improved.